Copyright (C) 2010 Coastal Winair All Rights Reserved
"Taking pride in our personal commitment to customer service and product expertise"
get updates and special
offers delivered to your
e-mail
offers delivered to your
\
\
\
\
\
Coastal Winair 27 Morin Street Biddeford, Me 04005 1-888-297-0550
Newsletter
Coastal Winair
News & Events
Apricus Solar
Coastal Winair
Other Services
CSA EnterprisesGarrett DBA as Garrett P&H
119 York street
Kennebunk, ME 04043
207-985-2130
Mark Oliver
www.garrettpillsbury.com/
119 York street
Kennebunk, ME 04043
207-985-2130
Mark Oliver
www.garrettpillsbury.com/
Coastal Winair
Line card
Line card
Apricus Solar
6 Sycamore Way, Unit 2
Branford, CT 06405, USA
Ph: +1 877-458-2634III Co., Inc.
6 Sycamore Way, Unit 2
Branford, CT 06405, USA
Ph: +1 877-458-2634III Co., Inc.
Apricus is a global company focused on providing simple cost-effective solutions for families and businesses concerned about the effects of climate change and rising energy costs.
All products meet or exceed international quality and engineering standards, and have a strong emphasis on simplistic design and ease of installation and use.
All products meet or exceed international quality and engineering standards, and have a strong emphasis on simplistic design and ease of installation and use.
One Apricus solar thermal collector can reduce CO2 levels as much as planting more than 200 trees and is the perfect choice for people wanting to become part of the solution by reducing their carbon footprint.
Accessories:.
Heat Dissipator
The HD is installed on the return line from the solar collector(s). When the temperature in the storage tank exceeds the pre-set limit (~80oC / 176oF), the controller switches a solenoid which directs the solar return flow through the HD before returning it back into the standard flow line. Alternatively a thermostatic mixing valve/tempering valve set to a suitable temperature can be used, providing mechanic, automatic regulation of flow through the heat dissipator.
As the hot water passes through the HD, heat is dissipated via the aluminium fins to surrounding air, the vertical fin arrangement promoting a passsive air current.
One HD-25 unit can dissipate most of the heat produced by an AP-30 collector in full sun (will depend upon the location of the unit and airflow)
As the hot water passes through the HD, heat is dissipated via the aluminium fins to surrounding air, the vertical fin arrangement promoting a passsive air current.
One HD-25 unit can dissipate most of the heat produced by an AP-30 collector in full sun (will depend upon the location of the unit and airflow)
The operation of the solar collector is very simple.
1. Solar Absorption: Solar radiation is absorbed by the evacuated tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 9-18 degrees. Throughout the day, the water in the storage tank is gradually heated.
1. Solar Absorption: Solar radiation is absorbed by the evacuated tubes and converted into heat.
2. Solar Heat Transfer: Heat pipes conduct the heat from within the solar tube up to the header.
3. Solar Energy Storage: Water is circulated through the header, via intermittent pump cycling. Each time the water circulates through the header the temperatures is raised by 9-18 degrees. Throughout the day, the water in the storage tank is gradually heated.
How does an Apricus Solar vacuum tube work?
Maine's Premier Heating & Cooling Distributor
27 Morin Street Biddeford, Me 04005 1-888-297-0550
September 2011
